HOW TO MAKE YOUR OWN FAN

Place the material of your choice with right side facing down, on a flat surface (table) then
place the spokes on top of the fabric. The spokes should be evenly distributed as shown in the picture. With a pencil, make a mark on the fabric where every spoke will be glued. Now take the spokes away from the fabric.  Using Elmer's glue, put a little bit on the fabric where you had marked previously, then  take the spokes and put them on top of the
fabric with the glue.  Make sure all the spokes have the same distance.  Once this is completed let it dry for about three hours. After the glue is dry fold the fan, spoke by spoke and put a rubber band around the top and another one around the bottom, this way the fan will close easily.
Leave it for couple hours before using it. When not using it, you can put the rubber bands around it until it takes shape.  You may want to buy one inexpensive fan to see the finished product so you can see how it is put together.